Wednesday, November 10, 2010

Guest Blogger: Custom Snowflake Cushion by Positively Splendid

Our Christmas-themed guest blogger is Amy from Positively Splendid. I have been following Amy's blog for a while now and LOVE it! She is SOOO creative and comes up with the best stuff. She has once again come up with something wonderful, and I'm so happy to have her here today to share it with all of us. Be sure to pop over and share some love with Amy.




Hi there! I am Amy, and my little corner of the blogging world is known as Positively Splendid, a place where I share all about my passions for cooking, crafting and raising a family. I am so thrilled to be here today! What an exciting contest CWTS has been. I have been absolutely awed by the caliber of work each of the contestants have brought to the table week after week!








Of all of my favorite times of year for flexing my creative muscles, Christmas has to be my absolute favorite. Today I'm going to share with you a fun technique for creating a fun, completely custom snowflake cushion. Remember cutting out snowflakes from folded squares of paper in elementary school? This project uses that super simple technique in a totally fresh way! All set? Let's get started.





For this project, you will need...





White canvas fabric: (1) square cut to 19x19 inches, and (2) rectangles cut to 19x11 inches


Freezer paper


Scissors


Iron


Acrylic paint


Textile medium for acrylic paint (this turns any ordinary acrylic paint into fabric paint)


Foam paint brush


Marine vinyl


Wash Away Wonder Tape


Leather sewing machine needle


Jeans sewing machine needle


Teflon presser foot (optional)


(3) fabric strips for your ruffles: 6x44 inches (optional)


Dental floss, for ruffling (optional)


(1) 18-inch pillow form


Basic sewing supplies: Machine, coordinating thread, shears, etc.





step 1 Cut (8) 4x4-inch pieces of freezer paper. Fold each piece in half, making sure to precisely match up the corners. Fold in half again, so your piece now looks like a square, as shown below. Fold once more to create a 45-45-90 triangle.











step 2 We're now going to trim off one of our 45-degree angles so that our finished snowflakes are circular instead of square. Using a rounded edge of some sort (I used a spool of ribbon), trace a mark as shown from the point of the 90-degree angle across to a point about a third of the way down from one of your 45-degree angles. Trim along this line. When you unfold your piece, it should now be a circle.









step 3 Now, the fun part! Use your imagination to snip shapes from your folded pieces. By trimming notches, bracket shapes, half circles and other shapes, each individual snowflake will be different from the rest. This is a terrific activity to do with children! Once all eight of your snowflakes have been trimmed, set them aside to use later on.









step 4 Take your square fabric piece, and fold it into quarters. Use your fingers to gently press a crease to mark the folding lines. When you unfold your piece, you should be able to clearly see the two lines you just pressed. (You'll use these to guide you as you iron on your snowflakes.)












step 5 Cut four strips of freezer paper that are as long as the width of the roll (approximately 18 inches) and 3-1/4 inches wide. Iron these strips on the outer perimeter of your square fabric piece, first ironing the top and bottom pieces, and then ironing the left and right pieces. (These strips will overlap at the corners just a bit.) Now, take your snowflakes and place them in rows within the boundaries of the square formed by your strips. (The rightmost space on your bottom row will not have a snowflake.) Arrange and rearrange them until you are satisfied with your pattern. Snap a picture now to refer to later on when you are ironing them into place.





step 6 Starting with the center snowflake, align its folding lines with the intersection of the creases you finger pressed in step 4 to ensure it is exactly centered. Iron it into place. Now, iron the rest of your snowflakes in a similar manner, using the creases and folding lines as necessary so that your columns and rows don't become crooked as you work. (I found it helpful to first iron the center piece, and then the pieces directly beside, above and below it. I then ironed on the remaining three corners.)












step 7 Mix your fabric medium with your acrylic paint according to the medium's package instructions. Use a foam brush to paint around your snowflakes, taking care to fill in all of the little nooks and crannies of each snowflake. Note: If using red paint as I did, I highly recommend you do two coats to ensure your color is even. I didn't do this, but I wish I had! Allow your paint to dry completely before peeling off your freezer paper pieces.









step 8 Create a template with your word processing software for a number or letter of your choice. (I made this pillow for my mom, so I used her last initial. I used Pickwick font at 375 pixels.) Print this off as a mirror image, then cut your template out and trace it onto the back of your vinyl. Carefully cut your piece out, and then adhere it to the open space in the last row on your pillow from using Wash Away Wonder Tape. With your machine outfitted with a leather needle and a Teflon foot, topstitch all the way around your letter to affix it to your pillow. (Alternatively, you can cover the bottom of your standard foot with a bit of Scotch tape and then spray it with just a touch of non-stick cooking spray. I know it sounds crazy, but it works - trust me!) Set your finished front panel aside.









step 9 Take your two rectangular pieces and create a narrow hem on one of the long edges of each one. (Do this by first folding and pressing 1/4 inch, and then folding and pressing another 1/4 inch, then stitching 1/8 inch from the edge to secure.) If you opt not to have a ruffled edge on your pillow, place your main pillow piece face up on your work surface. Place one of your finished back panel pieces on top of your finished front piece, right sides facing, aligning the edges and top corners. Make sure the hemmed edge of your back piece runs through the middle of your front panel. Now, take your second back panel piece and place it on the lower half, aligning the lower edges and corners, with the hemmed edge in the center. Secure with pins. With a size 16 needle (or a jeans needle), stitch all the way around with a 1/2-inch seam allowance. Clip your corners and turn right-side out.















step 10 If using ruffles, you will do exactly as described in step 9, except you will sandwich your ruffle between your front and back panels before stitching them together. To prepare your ruffles, stitch your ruffle strips together at their short ends with a 1/4-inch seam, stitching the beginning and end together to form a tube. Iron the seams open. Fold your tubes in half lengthwise and press. With your machine set to its widest zig-zag setting, zig-zag over dental floss along the unpressed side as shown to create a gathering mechanism. Gather your tube as necessary so it is the same length as the perimeter of your pillow's front panel. Pin into place, and then baste stitch 1/4 inch from the edge to secure the ruffle to your pillow front before proceeding to pin your back panel pieces as described in step 9. (Be sure to remove the pins from your ruffled piece before pinning on your back pieces. Broken needles from hitting hidden pins are no fun at all!)















Now, slip your cover onto your pillow form, and step back to enjoy your work!























Helpful hints and tips:





Not in the market for a new cushion? This freezer paper snowflake technique would be a terrific way to embellish a t-shirt for your child (or yourself!). What a fun way to make a wearable version of your little one's handiwork!





I opted to create a double ruffle here by also cutting a second, narrower strip of fabric that was precisely the same length as my first ruffle strip. After I sewed this narrow piece into a tube, I serged the edge, and then I aligned the unfinished edge of this tube with my wide tube before I ran my gathering stitches. This allowed me to ruffle both tubes at once, saving precious time in the process!





Needing some pillow forms for this project, but not wanting to spring for the pricey craft store versions? Check out my post here for how to make pillow forms out of a body pillow!





***





Y'all are welcome any time to stop by my blog! I would sure love it if you did. :)





Good luck to Mandi and Becca, Melanie and Jill and Heidi and Amy! I can't wait to see the Christmas creations you have up your sleeves!





Photobucket

4 comments:

  1. This is super cute idea...wonderful..looking so nice..thanks for the awesome tutorial..

    ReplyDelete
  2. I am INSPRIRED!!!

    I have plenty of fabric to put together this project! LOVE IT!!! Thanks for sharing!! I'm a beginner, but I think I can swing this. We shall see.

    Threadsoffler.blogspot.com

    Cheers,
    Erika (aka Fler)

    ReplyDelete
  3. I always love Amy's projects, and this is no exception! Simply gorgeous!!

    ReplyDelete
  4. I LOVE Amy. Like LOVE! She is so talented. This pillow has such amazing clean lines and is so cool! And I always love her signature vinyl/leather touches! Yay Amy!!

    ReplyDelete

Where I am no longer blogging, this blog is for reading purposes only. I am afraid I just can't keep up with it anymore, therefore, I may not be able to reply to all comments. Thank you.

Note: Only a member of this blog may post a comment.

Related Posts with Thumbnails