Tuesday, May 24, 2011

Sunny Side Up Pillow

Hey guys! Remember the pillow I made with my Accuquilt fabric cutter and circle dies?
Today I’m over at the Moda Bake Shop sharing the tutorial for it.

Thanks to my Facebook fans (specifically Kerri Clark and her cute son), the name of this pillow is Sunny Side Up.
Finished-Pillow
It goes perfectly in my guest bedroom (which is coming soon I PROMISE)!!!! You can see a little glimpse of the duvet cover that the pillow is sitting on, and that tutorial will be revealed shortly.

Don’t you just love yellow? I DO!!!

Full tutorial (originally appeared here on Moda Bake Shop May 24, 2011)




  • 1/2 yd fabric
  • 1 jelly roll (I used Sweetwater’s Sunkissed)
  • (1) 16” pillow form
  • Starch or fusible interfacing
  • 3” circle template {included in the Printer Friendly Version at the bottom of the post}

1. Cut (2) 15” x 15” squares from the 1/2 yd fabric. If you have a pillow form that is a different size than the 16” I used, just cut your fabric 1” smaller than your pillow.

2. Select several strips from your jelly roll. Cut them different widths ranging from 1” – 2”.
Strips

3. Sew your strips RST (right sides together) using a 1/4” seam allowance. Press the seams open.
Strips-sewn-together

4. We are going to use these sewn strips to cut our 3” circles from.

5. You have two different options at this point – 1) you can use starch or 2) you can use fusible interfacing. If you choose to use starch, go ahead and starch and iron about 4 times so your fabric is really stiff and easy to cut. If you choose to use fusible interfacing, go ahead and apply that to the wrong side of your sewn strips.
Interfacing-attached

6. Take your 3” circle template and trace 9 different circles on either the fusible interfacing or the back side of the fabric, then cut those out. I have an Accuquilt GO! Baby fabric cutter, so I used my 3” circle die cut to quickly cut my 9 circles.
Accuquilt

7. Arrange your circles on top of one of the 15” x 15” squares. If you starched, pin in place. If you used fusible interfacing, iron them on. All my circles were 1” away from each other and 1 3/4” away from the edges.
Place-appliques

8. Stitch appliques in place using a straight stitch, zigzag, blanket stitch, etc. I used a very tight zigzag.
Stitch-appliques

9. Pin your two 15”x 15” squares RST. We need to leave about an 8” opening to stuff the pillow form in. I marked mine with red pins so I knew where to start and stop sewing. Sew the two squares together with a 1/4” seam allowance. Clip the corners and turn right side out through your opening.
Sew-pillow-together-and-clip-corners

10. Stuff the pillow form in the opening and use a blind stitch (hand stitch) to sew the opening shut. Then you are done! You now have a beautiful pillow!
Finished-Pillow



One 16" x 16" pillow.




1 comment:

  1. I love this SOOO much. Makes me want to get a machine and learn how to sew lol

    ReplyDelete

Where I am no longer blogging, this blog is for reading purposes only. I am afraid I just can't keep up with it anymore, therefore, I may not be able to reply to all comments. Thank you.

Note: Only a member of this blog may post a comment.

Related Posts with Thumbnails