Thursday, October 13, 2011

Rustic Dining Set: Guest Post {AKA Design}

Have you linked up YOUR Round 2: Upcycled project? Prizes will be given to the top 3 viewed links. GO HERE to enter yours. Linky party open until Saturday, October 15th @ 6 pm MST.

What about bidding for some fabric to help a great cause: Swap a Smile? Place your bid HERE.

Now on to the tutorial. Coming in 1st place for Round 2 was Shannon & Dean {AKA Design} with their Rustic Dining Set.

This was a very clear favorite from the beginning. Jaw-droppingly stunning!!!

I want my dining set to look like that. Hmmm…do I dare?

Let’s see how they did it.


This project totally made us want to say "Never Again".

Just kidding.

Sort of.

Let's just say refinishing a dining room table and chairs IN the dining room is a tricky thing! (We don't have a basement or a garage).

Our old pine dining room set was purchased eight years ago from IDOMO in Toronto. At the time it barely fit into our apartment - it had to go up against the wall on one side. When we purchased our townhouse, the set fit into the dining room with just barely enough space to walk around it - when the chairs were pushed in.

Fast forward to this house and our dining room is about half of the 300 square foot addition (which also includes our living room), which means it was time to get a bigger set or DIY something with the old one.

And that brings us to this beautiful hunk of handsome that we scored for free...

Our plan was to remove the wood boards from the pallet, build a really large tabletop and reuse the legs from our old table as well as reusing the chairs from the old set.


After removing all the boards and trimming them square, Dean drilled holes in each piece, and attached them together with small dowels. He also glued them together in strategic places.

And what is one to do when there are no clamps large enough to hold the pieces together while the glue dries? Use ratchet straps, of course!


Anyway, once the glue dried and the table top was nice and solid - and heavy - we took it outside and Dean gave it a major sanding with the belt sander.

Smooth as a baby's bottom. :D


To assemble the table we used the legs and brackets from the old table and cut some new skirts (side pieces) from new pine.

After the table was assembled, the plan was to stain the top a nice dark walnut and paint the legs and chairs white. But when we filled most of the cracks and holes with stain-able wood filler, we realized that stain-able wood filler isn't. Stain-able that is.

Onto Plan B.


  1. We painted the whole table white - with Behr Swiss Coffee and my favourite Purdy paint brush. We used two coats of paint for good solid coverage.
  2. Then we distressed the edges and other places the table would naturally wear - with much sandpaper.
  3. And then we stained over top of the paint to age the paint and bring attention to the distressing - using Minwax Dark Walnut and a foam brush to apply the stain and a damp (almost wet) staining cloth to wipe away the excess. THIS STEP ACTUALLY STAINS THE PAINT LAYER. It also takes quite awhile to dry because of using an oil-based product OVER an acrylic one.
  4. After all is good and dry, we added three coats of wipe- on poly for protection using a staining pad. If you do this, BE coats have a "burn in" quality to them. This means you will remove some of the stain if your cloth has too much poly concentrated in one area. Ask me how I know.

    We followed almost the same steps for the chairs, except that we stained the seats. We also only used two coats of poly on the chairs.

How about some more beauty shots?

So, we think it was worth all the hard work. What do you think?

Dean & Shannon



SOOOO pretty and what an incredible job! I’m in L.O.V.E!

Can’t wait to see what you have in store for Round 3.


  1. Thank you for posting our tutorial, Tam! And for hosting's so fun...loads of work, but so fun!
    xo, Shannon & Dean

  2. This is beautiful! Thanks for sharing!


Where I am no longer blogging, this blog is for reading purposes only. I am afraid I just can't keep up with it anymore, therefore, I may not be able to reply to all comments. Thank you.

Note: Only a member of this blog may post a comment.

Related Posts with Thumbnails